This page displays smaller scale versions (1:35, 1:100) of my prehistoric animal figures, primarily used at this scale for model making and dioramas.
Each original was created using photogrammetry in STL format for subsequent 3D printing in resin.
Each original was created using photogrammetry in STL format for subsequent 3D printing in resin.
The 3D printed resin figures are offered unpainted and lightly sanded to remove as many support marks as possible.
Larger figures are hollow because printing such a large mass would be impossible due to their weight.
They have a few holes on the surface for the resin to flow through during printing, and you can also fill the interior to make the figure more solid.
Larger figures are hollow because printing such a large mass would be impossible due to their weight.
They have a few holes on the surface for the resin to flow through during printing, and you can also fill the interior to make the figure more solid.
|
|
|
|
|
|
